Indiba Deep Beauty Device 448kHz Radiofrecuencia Monopolar Cet Ret RF Slimming Weight Loss Machine

• Type: Slimming Machine
• Theory: RF (Radio Frequency)
• Application: Salon
• Portable: Portable
• Power: 300W
• Technology: Cet Ret RF
• Model NO.: SL-R16
• RF Frequency: 0.3-0.05MHz
• RF Penetration Depth: 20mm Max
• Voltage: 110V-240V
• Warranty: One Year
• Transport Package: Aluminum Case
• Trademark: SolanaBeauty
• Origin: Guangzhou, China
• HS Code: 8543709990
• Production Capacity: 1000pieces Per Month

Product Description

Product Description

ENDIBA RET (Resistive Electric Transfer) Targeted Radiofrequency Diathermy Therapy Device works deeper targeted tissue than current superficial diathermy therapy devices.It transfers high frequency electromagnetic energy through the tissues of the body creating selective tissue hyperthermy,it can decompose body fatty cell ,so as to loss weight.

The Resistive Electrical Transfer (RET), introduced in Spain in 1994 , is different from the CET in that basically the application electrode is not insulated, allowing the current to be transferred directly to the patient with less dispersion, thus obtaining an increase intemperature at a greater depth.
RET can penetrate energy into body tissue to create hyperthermy on visceral fatty layer,and impove tissue lymph circulation and metabolism, so it works better effect to burn fat and reduce cellulite. It can be operated on abdomen,thighs,arms,buttocks and other body parts.Such as it can slim about 4-5inches of abdominal fat within one month,not only can slim body,also restore the elasticity of the part.
 

RET's weight loss application is non-surgical, nearly painfree,no ecchymosis and swelling.It will not bring inconvenience

of your life. The method does not cause pigmentation, surgical lines and uneven skin phenomenon, so that it's a popular

choice to the people fearing with surgery. The RET device will be a significant replacement method to lose weight over the

normal surgical cellulite reduction methods.

Principle

1. The treatment site is placed between the plates of a capacitor and becomes the dielectric.
2. The RF energy is diffused through the part of the body locate between the plate electrodes.
3. The oscillating fields produce distortion of molecules, rotation of dipoles and vibration of ions
4. The movement of the molecules and ions generates heat within the tissues.
5. These actions have been shown to have positive clinical effect on enhancing blood flow.

The cap res machine is a non-invasive regeneration treatment that ensures obvious results from the first session. It uses cutting-edge medical technology and has greater therapeutic efficiency than any other treatment in the market today. uses high frequency currents to raise the internal temperature of human tissue and is particularly effective in treating the causes and effects of:

1.Promote blood circulation and improve metabolism and immunity
2.Regulate endocrine, improve sleep, relieve fatigue
3.Relieves and heals various parts of the body, such as cervical spondylosis, lumbar spondylosis, frozen shoulder, etc.
4.Facial lift, improve skin tone and slow down facial aging
5.Improve body size, reduce visceral excess fat, slimming and shaping
6.Restore normal five senses by relaxing muscles and cells
7.Helps with early recovery of ligament sprains, muscle strains, muscle damage, and exercise pain
8.Solve the symptoms of body cold, low basal metabolism, cold hands and feet, etc.

Features
 

1. New RET technology, a speical high frequency for fat cellulite burning.

2. Special designed for really fat people, not suitable for common fat, face, chest, muscle and bony areas.

3. No noise in ear like cavitation, no pain at all. People feel warm on skin and hot insides body.

4. Safe - No worry of harm skin as the high frequency apply on cellulite only.

5. Best body shapping result
 

Product Parameters

 

 

Part no	SL-R16
Rated voltage	100v-240v
Frequency	50/60hz
RF frequency	448k
Power	300w
Screen	touch screen 5.6 Inch
working temperature environment	10C-30C
Function	wrinkle remover.skin tighten, slimming. pain release
Ret treatment heads	4 pcs
Cap RF heads	7 pcs

Detailed Photos

 

Company Profile

FAQ

1.What are the differences between the capacitive and resistive methods in the RF System?
The capacitive method causes the temperature to increase more rapidly in the ep1dermis(superficial depth area)but it penetrates less energy internally than the resistive method. The internal benefit is directly related to the amount of energy absorbed by the body. Also, the resistive method uses 100% to the current
2.Which model of equipment provides the deepest treatment?
All models reach exactly the same depth, since all have a closed circuit from the Application elect Mode through the plate or return electrode, The main difference is that the total amount of power supplied and ,therefore, that absorbed by the body, is greater with a more powerful device and this applies even more to the resistive mode.
3.What temperature is achieved with the RF system?
Depending on the sensitivity of the area being treated ,the temperature in the epidermis can reach 44-45ºC,whether in capacitive or resistive mode, internally this will depend on the degree of blood circulation, the better it is,The lower the temperature will be and vice versa. For example" an increase in temperature is
achieved far more rapidly in an inflamed area than in that same area when not inflamed. The calculation can be made from the increase in temperature in one minute 1n one cubic cm of tissue. at a depth of 5 mm in health tissue and in the liver, the increase can be up to 4.2'C in resistive mode and in capacitive mode.

4.What size of electrode provides the greatest benefits with the resistive method in the RF system models?
If the resistance needs to be increased according to the graph. you should use the 60mm electrode, If it needs to be reduced, use e 90mm electrode
5.Does application in certain in certain areas hurt when using the resistive mode?
If so,why?
If it sometimes hurts, this is due to poor vascularisation in the affected area. The area does not have sufficient drainage capacity therefore creating pressure internally, This is what causes the discomfort, however it does not occur with the capacitive method as it is a more superficial treatment.
6.Why is it that when there is inflammation, the power supplied is very low, but the temperature rises very quickly?
Because as the circulation is adversely affected, the level of cooling is quite reduced and the power tolerated is also very low.

7.Why is it that if you gently touch someone being treated it can feel like you have received an electric shock?

Part of the energy(a very small amount, about 2 or 3 watts) absorbed by a body is transmitted to another body, and if the contact is brief, this small concentration of energy can cause discomfort, This problem is solved by simply making the contact firmer.

8.Can I be negatively affected by the radiation when giving the treatment?

Absolutely not, Firstly, the power transmitted is very low, and secondly considering that the effects of the type of current from our machines are very beneficial for the tissues, the effect is always beneficial. never negative.
9.Why do you heat the plate in RES mode and not in CAP mode?
Because the power supplied by the RES methods is much higher than in the CAP methods.
10.Why, when applied to the forehead, does the RES method cause contractions and the CAP not ?
The RES method does not penetrate the brain and the current is connected in the scalp, leading to over-circulation which results in the contractions. This does not represent a problem but the discomfort can be avoided by reducing the output power of the equipment. As the CAP method has the power to penetrate the skull, the effect described does not occur.

11.What can be done about the slight dizziness which occurs when treating the neck?
It should be stressed that this only occurs in people with hypotension and one solution is to recommend that they have a cup of coffee 10 minutes before the treatment.
12.Can any product be used to enhance a treatment?
Number when applying the treatment, the products recommended by US must be used, Afterwards, to take advantage of the casodilatation of the pores, any products considered appropriate may be used with a manual massage.
13.Why is there sometimes an apparent over-inflammation in the treatment area, especially in the joints?
This is due to poor drainage in the treated area and is not caused by inflammation, but an accumulation of blood. Treatment should not continue in the affected area, but all around the periphery, in order to create good drainage, for example, with a knee injury, the treatment should be applied to the calf and the thigh and not be continued on the knee itself. Instead, it can b gently massaged after the corresponding drainage has
been carried out.
14.Can one take a shower after treatment with the RF system without losing some of the treatment's benefits?
The only recommendation is to try to regulate the temperature of the water so that it 1s warm or not excessively cold. It should be said that, if wished ,the water can be turned to cold for 15 to 20 seconds at the end of the shower without decreasing the benefit obtained from the treatment
15.Can external metals cause burns during treatment with the RF system?
Only pendants and chains can cause problems if close to the application electrode since they do not have firm contact with the skin, it is therefore recommendable to remove all metallic objects not in firm contact with the skin, In the case of watches , etc.,they are not a problem as long as they do not interfere with the treatment at a mechanical level
16.Can the resistive method be used on the hair?
No. As the resistive method has a direct action with no isolation, it would products sparks from the hair, which would be very unpleasant.

Packaging & Shipping

 

Why Choose Us

 

-Same item, more competitive price
-Fast air delivery
 -Timely and reliable after-sales service
-Two year warranty and lifetime technical support
-We offer video training for all our machine
-OED&ODM available