Product Description
Hot Sculpting uses mono polar radio frequency (RF) deep heating as its core technology, using controlled mono polar radio frequency (RF) technology to provide targeted heating to large and small areas without damaging the skin.The fat and dermis are heated to 43-45°C through radio frequency devices of different shapes, which continuously generates heat and burns fat cells, making them inactive and apoptotic. After several weeks to several months of treatment, the apoptotic fat cells will pass through the body. Gradually metabolically excreted, the remaining fat cells are rearranged and compressed, and the fat layer is gradually thinned, reducing the fat by an average of 24-27%. At the same time, the heat can stimulate the regeneration of collagen in the dermis, the elastic fibers naturally produce immediate contraction and tightening, and repair the connective tissue, so as to achieve the effect of dissolving fat and sculpting the body, tightening the cheeks and eliminating the double chin.
Handpieces
No. 1, No. 2, No. 3, No. 4, No. 5, No. 6 handle: used for flat fixation therapy, it can be easily used without an operator, up to six 40cm², the handle can be fixed and placed on the body at the same time. localized fat pockets. 6 treatment areas covering the abdomen and flank up to 300 cm². Apply to the entire body area. 1 point(40cm²) treatment time: 15 minutes.
No. 7 handle, No. 8 handle: This handle is a hand-held, flat-on spot treatment for point treatment of fatty deposits smaller than the template area. The handle covers a small area of 16 cm² for treatment in 5 minutes. It is suitable for double chin, chubby flesh at the corners of the mouth, anterior breasts, and fat accumulation at the knees.
1 point treatment time: 5 minutes.
No. 9 handle: For sliding therapy over medium or large target areas. Larger area than traditional mobile radio frequency, large-scale body sculpting, suitable for waist, abdomen, arm, back, inner/outer thigh, buttocks/hip/lower edge.
Treatment time: 25-60 minutes.
No.10 handle: For sliding treatment on the face, apply to the face. Treatment time: 15-30 minutes.
Function
Body shaping
Eliminate stubborn fat cells
Eliminate the double chin
Skin tightening
Skin firming, skin liftin
Promote collagen regeneration
Improve the overall contour of the face and jawline.
Result
Clinical histology shows that Jisu ID Fat Dissolving Machine is clinically proven to cause inflammation and fat necrosis to a depth of 1.5 cm below the dermis. Histology research were complemented by clinical studies showing an average 26% reduction in fat as measured by ultrasound.
Our Advantages
1.Non-invasive and non-ablative.
2.The discomfort of this therapy is minimal, which can be compared with hot stone massage.
3.No consumables, non-invasive and painless, no anesthesia, no side effects, no recovery period, you can do whatever you want without affecting your normal work and life.
4. It is easy to use without an operator, and it is simple and safe.
5.Simultaneous treatment of multiple areas, 6 (flat fixed) hands-free handles that can cover 300cm² at the same time on the abdomen and both sides.
6.Special hand-held handle, suitable for smaller and more sensitive parts of the body, such as side breasts, double chin, face.
7.Maintain the subcutaneous temperature of the treated area evenly throughout the procedure.
8.Removes fat from the treated area while rejuvenating and firming the skin.
9.The system features an intuitive interface and a range of handles to customize treatment, whether for multiple hands-free areas or a single handle area for treatment.
10.Intelligent temperature control system, the radio frequency energy delivery is dynamically adjusted based on the continuous monitoring of the skin temperature, and the intelligent temperature control is within the set comfortable temperature, which can safely and effectively avoid tissue damage.
11.Real-time temperature detection system, real-time display of skin temperature during treatment, more intimate and more assured.
Product Parameters
| Product Name |
Jisu ID Fat Dissolving Machine |
| Technology |
Mono-polar radio frequency(RF) |
| Frequency |
2MHz |
| Input Voltage |
AC110V/220V |
| Output Power |
10-800W |
| Fuse |
5A |
| Air Box Size |
65×40×65cm |
| Gross Weight |
About 26kg |
Detailed Photos
FAQ
What is a Jisu ID Fat Dissolving Machine?
It is an innovative skin tightening and body sculpting device. Its working principle is to use radio frequency energy for deep controllable heating, which is painlessly transmitted through the epidermis down to the fat layer and dermis through various handles. layer.This radio frequency energy is converted into heat and destroys fat cells, which are then cleared by the body's lymphatic system. In addition to reducing fat, RF energy can also stimulate collagen regeneration, elastic fibers naturally produce immediate contraction and tightening, and repair connective tissue, so as to achieve fat-dissolving body sculpting, facial tightening and lifting, improvement of wrinkles, and elimination of double chin.
Is the Jisu ID Fat Dissolving Machine safe?
It has an intelligent temperature control and real-time temperature monitoring system, which provides precisely controlled radio frequency (RF) energy to the target treatment area through the handle, and the system monitors the skin temperature in real time to ensure safety and effectiveness. A non-invasive and comfortable treatment that is safe and non-invasive, has no side effects, and has no downtime.
What body parts can the Jisu ID Fat Dissolving Machine do?
The Jisu ID Fat Dissolving Machine has several handle options of different sizes, and the treatment depth is also different for different frequencies. It can be very customized for skin tightening and shaping for the dermis and different fat areas, from below the face to the body above the knees. are all areas that can be covered.
How many handle probes are needed for the abdomen?
Depending on the size of the area, 4-6 handle probes are required, each with a surface area of 40cm², up to 6 can cover the abdominal and lumbar area up to 300cm² of treatment area. No. 1, No. 2, No. 3, No. 4, No. 5, No. 6 handle probes can independently adjust different parameters, and all 6 can work independently or at the same time.
How many times do you need to do it? How long is the interval between treatments?
Depending on the thickness of the local fat, it is recommended to do a course of treatment (3-5 times). Do it every 2-4 weeks.
How long will it take to finish?
The operation can make the adipocytes inactive and apoptosis. The destroyed adipocytes begin to metabolize and excrete from the body after 4-6 weeks, and the best results appear after about 8 to 12 weeks of treatment.
Will it hurt to do a Jisu ID Fat Dissolving Machine? How does it feel?
Painless and feels similar to a heating pad or hot stone massage. The temperature can be adjusted according to your comfort level throughout the treatment. Although the heat in the adipose tissue keeps increasing during the treatment, with its new intelligent temperature control and real-time monitoring system, the skin surface temperature is constantly monitored and displayed dynamically in real time, which makes the customers feel comfortable during the treatment, and most of the customers are Acceptable, some customers are even comfortable enough to fall asleep.
Are there any side effects?
There are few side effects associated with this non-invasive treatment. RF energy is not ablative and therefore does not damage the skin. Some patients may experience mild redness, sweating, mild tenderness, or swelling in the treated area for the first few hours after treatment, similar to what you might experience after a hot stone massage, usually these side effects are It disappears within a few hours and does not affect normal life.
Is it easy to rebound after treatment?
No, because it uses the principle of monopolar radiofrequency lipolysis. The energy delivered permanently destroys subcutaneous fat cells, causing irreversible cell death, reducing the number of fat cells in the treated area and improving local contours. The number of fat cells in adulthood is fixed and will not increase, so eliminating destroyed fat cells from the body will not rebound. Therefore, if you can achieve a reasonable diet, choose a healthy lifestyle, and avoid overeating and weight gain, the effect of the treatment part can be maintained.
What is the difference between the monopolar radio frequency and the multipolar radio frequency of the Jisu ID Fat Dissolving Machine?
The monopolar radio frequency of the lipolysis machine has a deeper penetration depth, so the effect of fat reduction and shaping is better. The lipolysis machine can reduce the number of fat cells, and the multipolar radio frequency can only reduce the volume of fat cells.
What is the difference between the Jisu ID Fat Dissolving and other body sculpting treatments on the market?
• Faster -- Treats a body part in as little as 30 minutes.
• Safer -- no extended recovery time required.
• COMFORT--It feels like a hot stone massage.
• Fat Loss -- Clinical studies show an average fat loss of 24-27%.
• Versatile--Best of all, the Sculpture ID can treat a wide variety of patients who may not be suitable for other procedures, as well as many body parts, skin types and fat densities.
Who can't receive Jisu ID Fat Dissolving Machine treatment?
The following symptoms should be used with caution when using this instrument, the details are as follows:
- pregnant women
- Avoid use on the abdomen during women's menstrual period
- The treatment range is inflammation, purulent acne, acne flakes and more severe cases should not be treated
- Treatment of open or infected wounds/skin diseases: such as eczema, dermatitis, rash, psoriasis, etc. should not be treated
- People with known heat sensitivity, such as thermal urticaria, should not be treated
- If fillers such as hyaluronic acid have been injected within the treatment range within six months, it is not suitable for treatment
- Use with caution in high blood pressure, heart disease, diabetes, epilepsy, hyperthyroidism, cancer, and tumors;
- Use with caution in patients with bleeding disorders or concomitant use of blood thinners;
- Cardiovascular diseases: use with caution in patients with thrombophlebitis, arteriosclerosis, etc.;
- Use with caution in patients with implanted cardiac pacemakers, defibrillators and other electronic devices;
- Use with caution in those with metal implants (gold wire implants or those with nails, screws, metal joints, etc.).
){kind=link}